Description
Crommelin Elastoseal TR is a high performance, synthetic rubber based membrane, designed to deliver exceptional waterproofing performance in areas subjected to permanent immersion, areas of non-UV exposed pedestrian traffic or in application under screeds and toppings.
Elastoseal TR is exceptionally tough, durable and flexible and capable of accommodating structural movement.
Features:
- High flexibility and Class III elongation to accommodate structural movement.
- Excellent adhesion to a wide variety of substrates.
- Crack bridging to 1.5mm (existing cracks).
- Low VOC and fast drying.
- Suitable for permanent immersion.
- Suitable for over coating with screeds, renders and water based coatings.
- Suitable for the collection and storage of potable water.
- Complies to AS4654 Waterproofing of External Above Ground Building Elements & AS4020 Products for use with Drinking Water.
Suitable Substrates:
- Brickwork
- Cementitious Substrates
- Compressed Cement Sheets
- Concrete
- Concrete Blocks
- Exterior
- Fibre Cement Sheeting
- Interior
- Masonry
- Mortars (Brick & Slab Edge)
- Natural Stone
- Particle Board
- Plywood Sheeting
- Prefabricated Concrete
- Reconstituted Stone
- Renders
- Screeds
- Steel (suitably prepared)
Suitable Areas:
- Balconies
- Exterior
- Gutters
- Interior
- Podium Decks
- Podiums
- Retaining Walls
- Roof Gardens
- Slab Edge Waterproofing
- Terraces
- Under-tiles
- Verandas
- Vertical Surfaces
- Walls
- Water Tanks
Specifications:
- Number of Coats: 2
- Coverage: 1.5m2/L per coat
- Wet Film: 667 microns per coat
- Recoat: 2-4 hours
- Speed/Overcoat: Minimum 24 hours
- Full Cure: 7 days
- Colour: Light Grey
- Thinner/Clean Up: Water
- Shelf Life: 12 months
Frequently Asked Questions:
What type of surfaces can Crommelin Elastoseal TR be applied to?
Crommelin Elastoseal TR can be applied to a wide variety of substrates, including brickwork, cementitious substrates, compressed cement sheets, concrete, concrete blocks, fibre cement sheeting, masonry, mortars, natural stone, particle board, plywood sheeting, prefabricated concrete, reconstituted stone, renders, and steel (suitably prepared).
Is Crommelin Elastoseal TR suitable for areas that are permanently immersed in water?
Yes, Crommelin Elastoseal TR is suitable for permanent immersion and can also be used in areas of non-UV exposed pedestrian traffic or under screeds and toppings.
How many coats of Crommelin Elastoseal TR are required and what is the recommended recoat time?
Two coats of Crommelin Elastoseal TR are required, with a recommended recoat time of 2-4 hours. The full cure time is 7 days.
