Description
Crommelin Enhance WB is a clear, hard wearing, film forming, stain and water repellent coating that enhances and protects the appearance of low and medium porosity concrete and masonry surfaces.
Enhance WB’s hard film is resistant to water damage and disfigurement by airborne pollutants, and its water repellent properties are supplemented by a highly effective biocide to inhibit the growth of fungi, algae and lichens.
Features:
- Low to moderate surface colour enhancement.
- Complies to Paint Reference Number B15A in AS2311 – Guide to the Painting of Buildings.
- Hard wearing, highly water repellent, water based coating.
- Excellent adhesion.
- Resists stains and damage to substrate.
- Resists algal and other growth.
- UV stable – non yellowing.
- Interior and exterior.
- Low sheen to gloss finish.
- Not suitable for vehicular traffic.
Suitable Substrates:
- Cementitious Substrates
- Compressed Cement Sheets
- Concrete
- Concrete Blocks
- Concrete Paving
- Exposed Aggregate
- Exterior
- Fibre Cement Sheeting
- Grout (Cement Based)
- Honed Concrete
- Interior
- Masonry
- Natural Stone
- Pattern Concrete
- Pavers
- Prefabricated Concrete
- Reconstituted Limestone
- Reconstituted Stone
- Renders
- Stencilled Concrete
Suitable Areas:
- Alfresco Areas
- Concrete Floors
- Domestic Floors
- Exterior
- Facades
- Flooring
- House Interior
- Interior
- Interior Floors
- Paths & Walkways
- Pathways & Walkways
- Patios
- Paved Areas
- Pedestrian Areas
- Schools
- Shopping Malls
- Show Rooms
- Vertical Surfaces
- Workshops
Specifications:
- Number of Coats: 2+
- Coverage: 10-12m2/L per coat
- Wet Film: 85-100 microns per coat
- Recoat: 1 hour
- Full Cure: 7 days
- Colour: Clear
- Clean Up: Water
- Shelf Life: 12 months
Frequently Asked Questions:
What surfaces can I apply Crommelin Enhance WB Water-Based Surface Sealer to?
You can apply Crommelin Enhance WB Water-Based Surface Sealer to a wide range of surfaces, including cementitious substrates such as: concrete, concrete blocks, stencilled concrete, and reconstituted stone. It is also suitable for vertical surfaces and interior and exterior applications on floors, walls, and pathways.
How many coats of Crommelin Enhance WB Water-Based Surface Sealer should I use?
For optimal results, we recommend applying two coats of Crommelin Enhance WB Water-Based Surface Sealer. Ensure to allow a minimum of 4 hours between coats for proper drying and adhesion.
Can I apply Crommelin Enhance WB Water-Based Surface Sealer to concrete floors?
Yes, you can apply Crommelin Enhance WB Water-Based Surface Sealer to concrete floors. This sealer is suitable for interior and exterior floors, walls, and pathways made from cementitious substrates such as concrete, concrete blocks, stencilled concrete, and reconstituted stone.
