Description
Milwaukee M18FIW2F12-0 18V 5.0Ah Li-Ion Cordless Brushless 1/2″ Compact Impact Wrench with Friction Ring
The M18 FUEL 1/2″ Compact Impact Wrench with Friction Ring delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE 1/2″ Compact Impact Wrench with Friction Ring has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM-ION battery pack (not included) fits all M18 tools, delivering more work per charge and more work over the life of the pack.
Features:
- Friction ring ensures quick and easy socket changes POWERSTATE Brushless Motor delivers up to 339 Nm of nut-busting torque
- 4-Mode DRIVE CONTROL provides control over output speed and power
- Auto Shut-Off Mode prevents over-tightening and increases productivity by applying no more than 27 Nm of torque
- Bolt Removal mode delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
- 124.5 mm in length for maximum access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with fewer shadows
- Works in up to 69kV environments
- REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
Specifications:
- Voltage: 18V
- Anvil Type: 1/2″ Square with Friction Ring
- Fastening Torque: 339 Nm
- Nut-Busting Torque: 339 Nm
- DRIVE CONTROL: 4-Mode with Auto Shut-Off Mode & Bolt Removal Mode
- RPM: 0 – 900 / 0 – 1,650 / 0 – 2,400 / 0 – 2,400
- IPM: 0 – 1000 / 0 – 2,400 / 0 – 3,500 / 0 – 3,500
- Length: 125.4 mm
- Weight (Tool only): 1.1 kg
Warranty:
- 5 Year Warrranty as covered by Milwaukee Australia
Milwaukee M18B5 18V 5.0Ah Li-Ion RED LITHIUM Battery
The M18 5.0Ah REDLITHIUM-ION BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 5.0Ah REDLITHIUM-ION BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.
This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below -180C). Managed by Milwaukee’s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.
Features:
- Powers more than 100 Milwaukee M18 cordless power tools
- REDLINK intelligence provides optimised performance and over load protection
- Best in class construction – offers long lasting performance and durability
- Fuel gauge on board displays remaining run time for less down time on the job
- All weather performance, delivers fade free power in extreme jobsite conditions
Specifications:
- Voltage: 18V
- Capacity: 5.0Ah
- Charge time:
- M12-18FC: 60 mins
- M12-18C: 105 mins
- Weight: 0.72kg
Warranty:
- 2 Years Warranty Covered By Milwaukee Australia
Milwaukee M12-18FC 12V – 18V Multi Voltage Rapid Battery Charger
Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi voltage charger, M12-18FC, can sequencial charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.
Features:
- Charges all Milwaukee batteries up to 40% faster
- Charges all M12 and M18 batteries
- Sequencial charging
- REDLINK intelligence communicates directly with the battery
- REDLINK monitors cell voltage and temperature
- REDLINK charges to optimise the performance, protect and extend the life of the battery
Specifications:
- Voltage: 12V & 18V
- Battery type: Li-ion
- Charge Time:
- 2.0Ah: 26 minutes
- 4.0Ah: 47 minutes
- 5.0Ah: 59 minutes
- 6.0Ah: 75 minutes
- 9.0Ah: 90 minutes
- Weight: 0.77kg
Warranty:
- 2 Years Warranty Covered By Milwaukee Australia