Description
DeWalt DCN692N-XE 18V XR Li-ion Brushless 2-Speed Framing Nailer – Skin Only
Includes:
- 1 x Reversible belt hook
- 1 x Non-mark tip
Features:
- 18V XR Li-Ion Two Speed Framing Nailer featuring BRUSHLESS motor technology
- Two speeds – or power levels – to optimize the nailer for firing all lengths of nails
- Benefit from longer run-time, quicker readiness to fire, less recoil and more durability when firing short nails
- BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees Celsius and minimal cleaning/service requirements
- Class leading vibration and sound figures, offer fantastic user protection
- Versatile 30 – 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
- Reversible belt/rafter hook provides increased portability and versatility on the job-site
- Depths can be easily adjusted using the thumb wheel depth adjuster
- Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
- Ergonomic tool design allows the nailer to fit easily between a 400mm center stud
- Gas free operation offers a significant saving in running costs
- Tool free stall/jam clearance minimizes user down time
- Cordless design allows you to work without the inconvenience and safety risk of trailing leads
- User can engage contact trip lock-off and prevent accidental dis-charge of fastener
- Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
Specifications:
- Voltage: 18V
- Nail diameter: 2.8mm – 3.3mm
- Magazine angle: 30° – 34°
- Nail length: 50mm – 90mm
- Magazine capacity: up to 55 nails
- Magazine loading: Rear – load
- Firing mode: Bump & Sequential
- Nailer operating mode: Selective
- Integrated belt hook: Yes
- Jam clearing: Yes
- Impact energy (EPTA 05/2009): 105J
- Temperature range: -20° to 50°C
- Fault indicator: Yes
- Dimensions (L x W x H): 345mm x 125mm x 338mm
- Weight: 4.1kg
Warranty:
- 3 Years Warranty Covered By Dewalt Australia
DeWalt DCB184-XE 18V 5.0Ah XR Li-Ion Cordless Slide Battery
Features:
- Deliver 66% more runtime than a standard 3.0Ah battery pack
- LED state of charge indicator to help manage pack charging
- Lightweight design that provides the user with upgraded 5.0Ah power without increasing the size or weight over the 18V 3.0Ah battery pack
- No memory effect and virtually no self-discharge for maximum productivity & less downtime
- Protection against overheating, overloading and deep discharge conditions which increases the overall battery life
- Compatible with all DEWALT XR Li-Ion 18V Tools
Specifications:
- Voltage: 18V
- Battery type: Slide
- Amps: 5.0Ah
- Weight: 0.6kg
Warranty:
- 3 Years Warranty Covered By Dewalt Australia
DeWalt DCB115-XE 18V Multi-voltage Charger
The DCB115-XE is easy to use, quiet and exceptionally stable, this DeWalt charger plugs directly into the wall. The DCB115-XE features a built-in diagnostics system with an LED indicator that communicates battery charging, battery charged, power line problem, replace battery and battery too hot or cold to charge.
Features:
- Compatible with DeWalt 10.8V, 14.4V and 18V Li-ion slide batteries
- Diagnostics with LED indicator for battery charge status of charged, charging, power line problem, replace pack or battery temperature problem
- Wall mountable design
Specifications:
- Voltage: 10.8V, 14.4V, 18V
- Battery Chemistry: Li-ion
- Dimensions (L X W X H): 120mm x 150mm x 100mm
- Weight: 1kg
Warranty:
- 3 Years Warranty Covered By Dewalt Australia
