Description
Crommelin Enhance Penetrating is a clear silane/siloxane, highly water repellent, non-film forming treatment that penetrates deep into surfaces to cure and impede the passage of moisture.
Enhance Penetrating reacts with soluble salts in cementitious surfaces to block capillaries whilst still allowing the substrate to breathe.
Features:
- Clear natural finish – invisible protection that does not change surface look or feel.
- Highly penetrating treatment.
- Highly water repellent.
- Allows area treated to “breathe”.
- Does not increase surface slipperiness.
- Suppresses efflorescence (white salts).
- Reduces spalling by minimising water penetration.
- Not recommended if stain resistance is required. Use Crommelin Enhance Gloss, Satin, WB or Stain Repel.
- Silane/siloxane
Suitable Substrates:
- Brickwork
- Cementitious Substrates
- Clay Bricks
- Clay Pavers
- Compressed Cement Sheets
- Concrete
- Concrete Blocks
- Concrete Paving
- Exposed Aggregate
- Exterior
- Fibre Cement Sheeting
- HardieDeck
- Honed Concrete
- Interior
- Masonry
- Mortars (Brick & Slab Edge)
- Natural Stone
- Pattern Concrete
- Pavers
- Polished Concrete
- Prefabricated Concrete
- Reconstituted Stone
- Stencilled Concrete
- Terracotta (unsealed and porous)
Suitable Areas:
- Alfresco Areas
- Bus Stations
- Car Parks
- Concrete Floors
- Driveways
- Exterior
- Exterior Use
- Facades
- Garages
- Paths & Walkways
- Pathways & Walkways
- Patios
- Paved Areas
- Pedestrian Areas
- Pool Surrounds
- Renders
- Schools
- Shopping Malls
- Slab Edge Waterproofing
- Vertical Surfaces
- Walls
- Walls (exterior)
Specifications:
- Number of Coats: 2*
- Coverage:
- 1st Coat: 2-4m2/L
- 2nd Coat: 4-6m2/L
- Recoat: 1-2 hours
- Full Cure: 7 days
- Colour: Clear
- Clean Up: Crommelin Solvent
- Shelf Life: 12 months
